Comments on: 5 Sites with Free G-Code Files for CNC

By: Rooies

Rooies — Mon, 11 Apr 2022 18:43:58 +0000

In reply to Jhon C.

Hi Jhon C, can you please mail me on rooiespta13@gmail.com, I have a RZNC0901 DSP controller

By: Pioneer Cuts

Pioneer Cuts — Mon, 28 Mar 2022 11:34:52 +0000

Nice post. Thanks for sharing useful information.

By: Jhon C

Jhon C — Tue, 12 Oct 2021 01:55:30 +0000

I have problems with my Richnc Rznc09 Plasma cutting machine. This machine and its components have been discontinued, so i don´t have too much information about it. Do you know which software can i use to run the files?

By: Ethan Cox

Ethan Cox — Tue, 05 Oct 2021 07:16:22 +0000

ok so how to do it?. . i have seen people getting their blog posts published on their facebook fan page. pls help . thanks.

By: Mark Ramos

Mark Ramos — Thu, 15 Jul 2021 10:46:58 +0000

In reply to Luke.

You can pull carbide create (google it, very very simple. Steps are setup, draw, cut path, save file) OR my preference and almost as easy and VERY VERY powerful and nice https://www.inventables.com/technologies/easel. If I was not retired I would buy easel pro myself. It is that good..

Inkscape will work if you want to dedicated a lot of time. The first two are best. Easel main pick… All can get you started for free.

By: Luke

Luke — Tue, 08 Jun 2021 12:25:02 +0000

In reply to Roger. Cool, hope these sites mentioned above give you what you need

By: Roger

Roger — Tue, 08 Jun 2021 11:32:10 +0000

Yeah I’m just looking for a G-Code file for my gofab CNC plasma table I’d like to try a test cut just to make sure the equipment is running right so I’d like to have a G-Code file of something pretty simple like aRW or the word test

By: John I Noble

John I Noble — Sun, 16 May 2021 14:40:52 +0000

I’ve been having such a problem trying to run my CNC3 – 3018pro . Most of the files I find only like from Etsy run STL files and haven’t been able to convert to Gcode hope I can find something here I can run on my CNC